Shop

2pc F IT EDITION emblem Badges Sticker Decal for Chevy Car Truck Universal Silver and Red3D Dome Surface 100% brand new and high quality guaranteed Decorate your car charming luxury vivid Easy to use and to operate at affordable prices Perfect cover that is useful,helpful and so practical Automotive Adhesive for Long Lasting Installation Easy to use and to operate Never fade & Water Proof 3 1/8 x 1 1/4 or 80mm x 30mm Actual emblem, not a thin sticker 2pc Emblem Set
Installation Instructions 1. Removing old emblem or emblems can done neatly by using a heat gun on the lowest setting. Carefully pry the old emblem off using a putty scraper. 2.Then clean the area where the emblem adhesive still remains. Use adhesive cleaner and a clean rag. 3.Most important step is to use rubbing alcohol on a different rag to clean the remaining grease or dirt from the location. Allow it to air dry. 4.Using a level or ruler to create a straight line parallel to the ground, marking the location of the emblem against desired surface or body lines. Use painters tape to make your guide lines. 5.Prepare the emblem, making sure it’s clean. Be sure to never touch the application adhesive on the back of the emblem after Remove the backing tape from the adhesive. 6.Hold the emblem just above the surface in the desired location, using the painters tape as a guide to keep the emblem level located properly. 7.Stick the emblem on and hold it in place until the adhesive has had a chance to setup bond on the surface of the vehicle. This usually takes 10 seconds..